| Part Number : 123179A4R06 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-482-1579 (5305014821579) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-482-1579 (014821579) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 123179A4R06, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014821579, part number 123179A4R06 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 123179A4R06 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-482-1579 (5305014821579) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 014821579 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 123179A4R06, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014821579, part number 123179A4R06 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-482-1579 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014821579 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 123179A4R06 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | OVAL COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS498 NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASL | HEAD DIAMETER | 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | B-1 ACFT |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4340 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 0.785 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| ANEE | GRIP LENGTH | 0.375 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
