| Part Number : LE111-0035-2312 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-483-6893 (5305014836893) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-483-6893 (014836893) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: LE11100352312 | |||
Thank you for taking an interest in part number LE111-0035-2312, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014836893, part number LE111-0035-2312 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
25 canadian forces supply depot
CAGE Code: 35637 |
31 mile equipment co
CAGE Code: 07PE3 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
3m france
CAGE Code: F0347 |
|
2is inc
CAGE Code: 1ZKD0 |
1 source electronic components inc
CAGE Code: 3FY68 |
|
24 hour distributors
CAGE Code: 12136,3WKM0 |
3m purification pty limited
CAGE Code: Z5295 |
|
3m united kingdom plc
CAGE Code: K0993,K8767 |
3m health care service center
CAGE Code: 0UTW7 |
|
2eme regiment du materiel
CAGE Code: FARD5 |
1343080 alberta ltd
CAGE Code: L0796 |
|
3dfx interactive
CAGE Code: KA796 |
3m health care ltd
CAGE Code: U5989 |
|
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
| Part Number : LE111-0035-2312 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-483-6893 (5305014836893) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 014836893 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number LE111-0035-2312, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014836893, part number LE111-0035-2312 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-483-6893 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014836893 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LE111-0035-2312 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | OVAL COUNTERSUNK |
| ANEE | GRIP LENGTH | 0.750 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.338 INCHES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS 498 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPEII, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASB | FASTENER LENGTH | 1.088 INCHES MINIMUM AND 1.103 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
