| Part Number : TX1027D6-5A | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-485-5710 (5305014855710) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-485-5710 (014855710) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1027D65A | |||
Thank you for taking an interest in part number TX1027D6-5A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014855710, part number TX1027D6-5A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1027D6-5A | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-485-5710 (5305014855710) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 014855710 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1027D6-5A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014855710, part number TX1027D6-5A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-485-5710 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014855710 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11825D6-5A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR). |
| AAVA | POINT DIAMETER | 0.578 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| SR-1 | MANUFACTURERS CODE | 76301 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASB | FASTENER LENGTH | 0.891 INCHES NOMINAL |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 3M1170D6-5A |
| AASA | THREAD LENGTH | 0.578 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 8470 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AASL | HEAD DIAMETER | 0.524 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | F/A-18E, F/A-18F |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AAUR | GRIP DIAMETER | 0.374 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQJ | POINT STYLE | FLAT |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ANEE | GRIP LENGTH | 0.313 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
