| Part Number : TX1026C4-9F | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-485-5818 (5305014855818) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-485-5818 (014855818) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1026C49F | |||
Thank you for taking an interest in part number TX1026C4-9F, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014855818, part number TX1026C4-9F is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1026C4-9F | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-485-5818 (5305014855818) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 014855818 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1026C4-9F, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014855818, part number TX1026C4-9F is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-485-5818 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014855818 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11827C4-9F | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQJ | Point Style | FLAT |
| AASK | Head Style | FLAT COUNTERSUNK |
| ANEE | Grip Length | 0.5525 INCHES MINIMUM AND 0.5725 INCHES MAXIMUM |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| ABQZ | Internal Drive Style | TORX |
| CMLP | Thread Quantity Per Inch | 28 |
| SFTT | Surface Treatment | ALUMINUM OVERALL AND CHROMATE OVERALL |
| AASB | Fastener Length | 0.9725 INCHES MINIMUM AND 1.0025 INCHES MAXIMUM |
| AAUR | Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| CRTL | Criticality Code Justification | AGAV |
| CBBL | Features Provided | CETYL ALCOHOL LUBRICANT |
| AASA | Thread Length | 0.425 INCHES NOMINAL |
| STDC | Surface Treatment Document And Classification | MIL-C-83488, TYPE II, CLASS 3 MIL SPEC ALL TREATMENT RESPONSES OVERALL |
| AASL | Head Diameter | 0.470 INCHES MINIMUM AND 0.477 INCHES MAXIMUM |
| MDCL | Material Document And Classification | AMC 5662, INCONEL 718 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CXCY | Part Name Assigned By Controlling Agency | BOLT, 100 DEG TENSION HEAD, GEAR DRIVE RECESS |
| AAJF | Thread Direction | RIGHT-HAND |
| THSD | Thread Series Designator | UNJF |
| AAUH | Spline Minor Diameter | 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM |
| AGAV | End Item Identification | F18 E/F |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUJ | Spline Major Diameter | 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM |
| AAWU | Single Shear Strength | 125000 POUNDS PER SQUARE INCH |
| MRC | Decoded Requirement | Clear Text Reply |
| AAJD | Thread Class | 3A |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
