| Part Number : HT4017-08-11 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-507-5050 (5305015075050) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 01-507-5050 (015075050) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT40170811 | |||
Thank you for taking an interest in part number HT4017-08-11, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015075050, part number HT4017-08-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT4017-08-11 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-507-5050 (5305015075050) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 015075050 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT4017-08-11, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015075050, part number HT4017-08-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-507-5050 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015075050 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4017-08-11 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | OVAL COUNTERSUNK |
| AHYM | NOMINAL THREAD DIAMETER | 0.1640 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 23M112,MCDONNEL DOUGLAS CORP MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.312 INCHES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | 0.2916 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| AASB | FASTENER LENGTH | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE-100 DEGREE C'SUNK HI-TORGUE, SPECIAL HEAD, CRES (125 KSI FSU) .164-32 SIZE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AGAV | III END ITEM IDENTIFICATION | CTR FUSELAGE |
| ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
