| Part Number : TX1027C4-6AF | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-512-8344 (5305015128344) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-512-8344 (015128344) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1027C46AF | |||
Thank you for taking an interest in part number TX1027C4-6AF, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015128344, part number TX1027C4-6AF is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
2connect it b v
CAGE Code: HG221 |
|
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
1 nation technology corp
CAGE Code: 08DH5 |
|
3m alaska
CAGE Code: 0NZU5 |
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
3dbm co inc
CAGE Code: 31791,62874 |
|
3nity products llc
CAGE Code: 8HDM8 |
1 nci j bkm mrk k ligi
CAGE Code: T0790 |
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
4 ld inc
CAGE Code: 0ACW5 |
3m co admininistrative electronic
CAGE Code: 20999 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
| Part Number : TX1027C4-6AF | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-512-8344 (5305015128344) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 015128344 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1027C4-6AF, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015128344, part number TX1027C4-6AF is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-512-8344 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015128344 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1027C4-6AF | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAVA | POINT DIAMETER | 0.425 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASL | HEAD DIAMETER | 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASB | FASTENER LENGTH | 0.785 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AAJD | THREAD CLASS | 3A |
| ABQJ | POINT STYLE | FLAT |
| AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AASA | THREAD LENGTH | 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
