| Part Number : TX1024D6D15-6A | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-513-8623 (5305015138623) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-513-8623 (015138623) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1024D6D156A | |||
Thank you for taking an interest in part number TX1024D6D15-6A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015138623, part number TX1024D6D15-6A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1024D6D15-6A | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-513-8623 (5305015138623) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 015138623 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1024D6D15-6A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015138623, part number TX1024D6D15-6A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-513-8623 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015138623 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11853D6D15-6A | 5 | 8 | E |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | Head Style | FLAT COUNTERSUNK |
| MRC | Decoded Requirement | Clear Text Reply |
| AHYM | Nominal Thread Diameter | 0.375 INCHES |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AGAV | End Item Identification | F18 E/F |
| AASA | Thread Length | 0.375 INCHES NOMINAL |
| THSD | Thread Series Designator | UNJF |
| AAUR | Grip Diameter | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| CXCY | Part Name Assigned By Controlling Agency | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH,INCONEL 718 (125 KSI SHEAR) |
| AASB | Fastener Length | 1.298 INCHES MINIMUM AND 1.328 INCHES MAXIMUM |
| AASL | Head Diameter | 0.524 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ABQZ | Internal Drive Style | TORX |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| CMLP | Thread Quantity Per Inch | 24 |
| AAUH | Spline Minor Diameter | 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM |
| MDCL | Material Document And Classification | BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| ANEE | Grip Length | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| AAUJ | Spline Major Diameter | 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
