| Part Number : 120-264E3-14 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-528-5505 (5305015285505) | |||
| Item Name : Screw Machine | CAGE Code : 80539 | ||
| NIIN : 01-528-5505 (015285505) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 77777 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 120264E314 | |||
Thank you for taking an interest in part number 120-264E3-14, that of which is listed with the description Screw Machine; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015285505, part number 120-264E3-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 120-264E3-14 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-528-5505 (5305015285505) | |||
| Item Name : Screw Machine | CAGE Code : 80539 | ||
| NIIN : 015285505 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 120-264E3-14, that of which is listed with the description Screw Machine; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015285505, part number 120-264E3-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-528-5505 Item PartTypeName: SCREW,MACHINE | 5305 | 015285505 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 120-264E3-14 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AGAV | III END ITEM IDENTIFICATION | MV-22 AIRCRAFT |
| CQBC | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2700METHOD 1,TYPE2 ASSN STD ALL TREATMENT RESPONSES OR AMS2700METHOD,TYPE8 CLASS 1 ASSN STD SINGLE TREATMENT RESPONSE |
| AASB | FASTENER LENGTH | 0.875 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| CYAU | SCREW MATERIAL | IRON ALLOY 660 |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,100 DEGREE FLUSH HEAD,FULL THREAD,6 LOBE RECESS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5835 ASSN STD SINGLE MATERIAL RESPONSE |
| AASA | THREAD LENGTH | 0.795 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
