| Part Number : NAS5316E3P8J | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-530-2414 (5305015302414) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-530-2414 (015302414) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS5316E3P8J, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015302414, part number NAS5316E3P8J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS5316E3P8J | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-530-2414 (5305015302414) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 015302414 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS5316E3P8J, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015302414, part number NAS5316E3P8J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-530-2414 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015302414 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS5316E3P8J | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CQBC | Minimum Tensile Strength | 3180 POUNDS PER SQUARE INCH |
| ABQJ | Point Style | FLAT |
| AASK | Head Style | FLAT COUNTERSUNK |
| MRC | Decoded Requirement | Clear Text Reply |
| ABQZ | Internal Drive Style | TORX |
| AHYM | Nominal Thread Diameter | 0.190 INCHES |
| SFTT | Surface Treatment | CADMIUM OVERALL OR PASSIVATE OVERALL |
| CMLP | Thread Quantity Per Inch | 32 |
| MATT | Material | STEEL CORROSION RESISTING OVERALL |
| THSD | Thread Series Designator | UNJF |
| AASA | Thread Length | 0.338 INCHES NOMINAL |
| AASB | Fastener Length | 0.838 INCHES NOMINAL |
| AAUR | Grip Diameter | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| AASL | Head Diameter | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ANEE | Grip Length | 0.500 INCHES NOMINAL |
| AAJF | Thread Direction | RIGHT-HAND |
| AAUJ | Spline Major Diameter | 0.155 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | SCREW, CLOSE TOLERANCE. |
| FEAT | Special Features | END SHALL BE FLAT AND CHAMFERED PLUS INCOMPLETE THREAD NOT TO EXCEED TWO PITCHES. |
| AAUM | Locking Feature | PATCH LOCKING FEATURE |
| MDCL | Material Document And Classification | A286 CONFORMING TO THE CHEMISTRY OF AMS5731, AMS5732, AMS5737, OR AMS5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAVA | Point Diameter | 0.189 INCHES MINIMUM |
| AAJD | Thread Class | 3A |
| STDC | Surface Treatment Document And Classification | AMS-QQ-P-35 OR CADIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 3. ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
