| Part Number : HT4027-7-15 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-547-1638 (5305015471638) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-547-1638 (015471638) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT4027715 | |||
Thank you for taking an interest in part number HT4027-7-15, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015471638, part number HT4027-7-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT4027-7-15 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-547-1638 (5305015471638) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 015471638 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT4027-7-15, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015471638, part number HT4027-7-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-547-1638 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015471638 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WC4027-7-15 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 20 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| ANEE | GRIP LENGTH | 0.938 INCHES NOMINAL |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | ST3M557-7-15 |
| AGAV | III END ITEM IDENTIFICATION | AIRCRAFT, HORNET F/A-18 (E/F) |
| AAJD | THREAD CLASS | 3A |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AHYM | NOMINAL THREAD DIAMETER | 0.4375 INCHES |
| AASL | HEAD DIAMETER | 0.612 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | DWG NAME: SCREW - CLOSE TOLERANCE, 100 DEGREE COUNTERSUNK, REDUCED HEAD, HI-TORQUE, NON-MAGNETIC CRES (125 KSI FSU) |
| AASU | HEAD HEIGHT | 0.101 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.546 INCHES NOMINAL |
| SR-1 | MANUFACTURERS CODE | 76301 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.656 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
