| Part Number : TX1027D4-17A | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-599-1954 (5305015991954) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-599-1954 (015991954) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1027D417A | |||
Thank you for taking an interest in part number TX1027D4-17A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015991954, part number TX1027D4-17A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1027D4-17A | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-599-1954 (5305015991954) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 015991954 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1027D4-17A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305015991954, part number TX1027D4-17A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-599-1954 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015991954 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1170-D4-17A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | Material Document And Classification | PH13-8MOCRES MFR REF 1ST MATERIAL RESPONSE OVERALL |
| MATT | Material | STEEL COMP XM-13 OVERALL |
| AASK | Head Style | FLAT COUNTERSUNK |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| THSD | Thread Series Designator | UNJF |
| MRC | Decoded Requirement | Clear Text Reply |
| AGAV | End Item Identification | EA6B |
| AAUR | Grip Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| CQBC | Minimum Tensile Strength | 4400 POUNDS PER SQUARE INCH |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL | Head Diameter | 0.3859 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| AASB | Fastener Length | 1.1210 INCHES MINIMUM AND 1.1510 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| ABQZ | Internal Drive Style | TORX |
| CMLP | Thread Quantity Per Inch | 28 |
| AASA | Thread Length | 0.735 INCHES NOMINAL |
| AASU | Head Height | 0.060 INCHES MAXIMUM |
| ANEE | Grip Length | 1.1210 NOMINAL MILS AND 1.1510 NOMINAL CENTIMETERS |
| AAUJ | Spline Major Diameter | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
