| Part Number : 3M33-12D21 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-00-061-7861 (5306000617861) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 00-061-7861 (000617861) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 3M3312D21 | |||
Thank you for taking an interest in part number 3M33-12D21, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306000617861, part number 3M33-12D21 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M33-12D21 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-00-061-7861 (5306000617861) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 000617861 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 3M33-12D21, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306000617861, part number 3M33-12D21 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-061-7861 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 000617861 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M33-12D21 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.094 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.390 INCHES MINIMUM AND 2.437 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.406 INCHES NOMINAL |
| AATB | WIDTH BETWEEN FLATS | 1.052 INCHES MINIMUM AND 1.065 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.7481 INCHES MINIMUM AND 0.7488 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.146 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
| ANEE | GRIP LENGTH | 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.171 INCHES MINIMUM FIRST HOLE AND 2.203 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
