| Part Number : A1C485-2 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-00-392-0742 (5306003920742) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 06725 | ||
| NIIN : 00-392-0742 (003920742) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: A1C4852 | |||
Thank you for taking an interest in part number A1C485-2, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306003920742, part number A1C485-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A1C485-2 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-00-392-0742 (5306003920742) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 06725 | ||
| NIIN : 003920742 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number A1C485-2, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306003920742, part number A1C485-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-392-0742 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 003920742 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 965834-2 | 2 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.406 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.968 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| AAWC | FIRST DIAMETER FROM HEAD | 0.164 INCHES NOMINAL |
| AAWD | SECOND DIAMETER FROM HEAD | 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.047 INCHES NOMINAL |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.562 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES OVERALL |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
