| Part Number : A1C1025-4-14 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-00-959-0986 (5306009590986) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 06725 | ||
| NIIN : 00-959-0986 (009590986) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: A1C1025414 | |||
Thank you for taking an interest in part number A1C1025-4-14, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306009590986, part number A1C1025-4-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A1C1025-4-14 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-00-959-0986 (5306009590986) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 06725 | ||
| NIIN : 009590986 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number A1C1025-4-14, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306009590986, part number A1C1025-4-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-959-0986 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 009590986 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A1C1025-4-14 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.367 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.313 INCHES MINIMUM AND 1.353 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.369 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.193 INCHES MINIMUM FIRST HOLE AND 1.253 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES TOP OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 0131 92215 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
