| Part Number : BACB30LJ4H11 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-054-1547 (5306010541547) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 01-054-1547 (010541547) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number BACB30LJ4H11, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306010541547, part number BACB30LJ4H11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : BACB30LJ4H11 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-054-1547 (5306010541547) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 010541547 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number BACB30LJ4H11, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306010541547, part number BACB30LJ4H11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-054-1547 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 010541547 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30LJ4H11 | 3 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.394 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.062 INCHES MINIMUM AND 1.092 INCHES MAXIMUM |
| AASK | HEAD STYLE | UNDERCUT HEXAGON |
| AASU | HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.051 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 3 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 14000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON CORNERS |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
