| Part Number : ST3M735-4-22 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-054-4623 (5306010544623) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-054-4623 (010544623) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: ST3M735422 | |||
Thank you for taking an interest in part number ST3M735-4-22, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306010544623, part number ST3M735-4-22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : ST3M735-4-22 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-054-4623 (5306010544623) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 010544623 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number ST3M735-4-22, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306010544623, part number ST3M735-4-22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-054-4623 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 010544623 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 121673-4-22 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.282 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.793 INCHES MINIMUM AND 1.813 INCHES MAXIMUM |
| AASK | HEAD STYLE | DISHED HEXAGON |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.693 INCHES MINIMUM AND 1.723 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
