| Part Number : 122895-10D68 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-117-2397 (5306011172397) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-117-2397 (011172397) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 12289510D68 | |||
Thank you for taking an interest in part number 122895-10D68, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306011172397, part number 122895-10D68 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 122895-10D68 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-117-2397 (5306011172397) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 011172397 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 122895-10D68, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306011172397, part number 122895-10D68 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-117-2397 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 011172397 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VCG0001-10D68 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.066 INCHES MINIMUM AND 1.106 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 5.326 INCHES MINIMUM AND 5.346 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AASU | HEAD HEIGHT | 0.351 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.146 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| ANEE | GRIP LENGTH | 4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 5.076 INCHES MINIMUM FIRST HOLE AND 5.106 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 23-112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
