| Part Number : PBF1265-6D33 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-164-4459 (5306011644459) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 27624 | ||
| NIIN : 01-164-4459 (011644459) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: PBF12656D33 | |||
Thank you for taking an interest in part number PBF1265-6D33, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306011644459, part number PBF1265-6D33 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : PBF1265-6D33 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-164-4459 (5306011644459) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 27624 | ||
| NIIN : 011644459 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number PBF1265-6D33, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306011644459, part number PBF1265-6D33 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-164-4459 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 011644459 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PBF1265-6D33 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.391 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 3.443 INCHES MINIMUM AND 3.463 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AASU | HEAD HEIGHT | 0.210 INCHES NOMINAL |
| AATB | WIDTH BETWEEN FLATS | 0.578 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ANEE | GRIP LENGTH | 3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.325 INCHES MINIMUM AND 3.355 INCHES MAXIMUM FIRST HOLE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
