| Part Number : AIC687-5D47 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-468-5280 (5306014685280) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 01-468-5280 (014685280) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AIC6875D47 | |||
Thank you for taking an interest in part number AIC687-5D47, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306014685280, part number AIC687-5D47 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AIC687-5D47 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-468-5280 (5306014685280) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 014685280 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AIC687-5D47, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306014685280, part number AIC687-5D47 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-468-5280 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 014685280 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WC744-5D47 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZH | HEAD MINOR DIAMETER | 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| AASB | FASTENER LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE, SPLINE DRIVE, CRES (125 KSI FSU) DRILED,SHORT THREAD |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM FIRST HOLE |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.484 INCHES MINIMUM AND 0.511 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
| AGAV | III END ITEM IDENTIFICATION | USED ON F18 E&F |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | 0.313 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.187 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
