| Part Number : PBF1265-7D20 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-477-5920 (5306014775920) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 27624 | ||
| NIIN : 01-477-5920 (014775920) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: PBF12657D20 | |||
Thank you for taking an interest in part number PBF1265-7D20, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306014775920, part number PBF1265-7D20 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : PBF1265-7D20 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-477-5920 (5306014775920) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 27624 | ||
| NIIN : 014775920 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number PBF1265-7D20, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306014775920, part number PBF1265-7D20 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-477-5920 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 014775920 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PBF1265-7D20 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZH | HEAD MINOR DIAMETER | 0.711 INCHES MINIMUM AND 0.717 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| AASA | THREAD LENGTH | 0.453 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE, SPLINE DRIVE, CRES (125 KSI FSU)DRILLED,SHORT THREAD |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| ANEE | GRIP LENGTH | 1.250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.4375 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASB | FASTENER LENGTH | 1.693 INCHES MINIMUM AND 1.713 INCHES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.578 INCHES MINIMUM AND 1.588 INCHES MAXIMUM FIRST HOLE |
| AASU | HEAD HEIGHT | 0.257 INCHES MINIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.671 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
