| Part Number : CB9294-5-19C | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-478-0716 (5306014780716) | |||
| Item Name : Bolt Machine | CAGE Code : 06725 | ||
| NIIN : 01-478-0716 (014780716) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01847 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: CB9294519C | |||
Thank you for taking an interest in part number CB9294-5-19C, that of which is listed with the description Bolt Machine; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306014780716, part number CB9294-5-19C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CB9294-5-19C | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-478-0716 (5306014780716) | |||
| Item Name : Bolt Machine | CAGE Code : 06725 | ||
| NIIN : 014780716 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number CB9294-5-19C, that of which is listed with the description Bolt Machine; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306014780716, part number CB9294-5-19C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-478-0716 Item PartTypeName: BOLT,MACHINE | 5306 | 014780716 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 03A510-5-19C | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 3A |
| FEAT | Special Features | BOLT HEAD IS CAPPED, AND CAP SHALL HAVE FINISH COATINGS APPLIED TO ALL UNBONDED SURFACES; BOLT HAS MINIMUM ULTIMATE SHEAR STRENGTH OF 132,000 PSI |
| AASK | Head Style | FLAT COUNTERSUNK |
| AHYM | Nominal Thread Diameter | 0.3125 INCHES |
| MATT | Material | STEEL CORROSION RESISTING OVERALL |
| ANEE | Grip Length | 1.1775 INCHES MINIMUM AND 1.1975 INCHES MAXIMUM |
| CQBC | Minimum Tensile Strength | 260000 POUNDS PER SQUARE INCH |
| THSD | Thread Series Designator | UNJF |
| AGAV | End Item Identification | AIRCRAFT, BOMBER |
| AASL | Head Diameter | 0.635 INCHES NOMINAL |
| AASA | Thread Length | 0.582 INCHES NOMINAL |
| CSYM | Surface Finish | 32.0 MICROINCHES FASTENER |
| AASB | Fastener Length | 1.7545 INCHES MINIMUM AND 1.7845 INCHES MAXIMUM |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AAJF | Thread Direction | RIGHT-HAND |
| STDC | Surface Treatment Document And Classification | MIL-L-46010, TYPE I MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| CMLP | Thread Quantity Per Inch | 24 |
| MRC | Decoded Requirement | Clear Text Reply |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MDCL | Material Document And Classification | AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
