| Part Number : CB9294-4-14C | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-478-1130 (5306014781130) | |||
| Item Name : Bolt Machine | CAGE Code : 06725 | ||
| NIIN : 01-478-1130 (014781130) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01847 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: CB9294414C | |||
Thank you for taking an interest in part number CB9294-4-14C, that of which is listed with the description Bolt Machine; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306014781130, part number CB9294-4-14C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CB9294-4-14C | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-478-1130 (5306014781130) | |||
| Item Name : Bolt Machine | CAGE Code : 06725 | ||
| NIIN : 014781130 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number CB9294-4-14C, that of which is listed with the description Bolt Machine; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306014781130, part number CB9294-4-14C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-478-1130 Item PartTypeName: BOLT,MACHINE | 5306 | 014781130 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CB9294-4-14C | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAJD | THREAD CLASS | 3A |
| ANEE | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASA | THREAD LENGTH | 0.498 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | BOLT HEAD IS CAPPED, AND SHALL HAVE FINISH COATINGS APPLIED TO ALL UNBONDED SURFACES; ITEM TO BE USED IN DML COVE PANELS |
| AGAV | III END ITEM IDENTIFICATION | AIRCRAFT BOMBER |
| AASL | HEAD DIAMETER | 0.449 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH |
| AASB | FASTENER LENGTH | 1.358 INCHES MINIMUM AND 1.388 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.2500 INCHES |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-46010, TYPE I MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES FASTENER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
