| Part Number : TX1028V4-7-5A | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-517-0615 (5306015170615) | |||
| Item Name : Bolt Machine | CAGE Code : 80539 | ||
| NIIN : 01-517-0615 (015170615) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01847 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1028V475A | |||
Thank you for taking an interest in part number TX1028V4-7-5A, that of which is listed with the description Bolt Machine; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015170615, part number TX1028V4-7-5A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1028V4-7-5A | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-517-0615 (5306015170615) | |||
| Item Name : Bolt Machine | CAGE Code : 80539 | ||
| NIIN : 015170615 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number TX1028V4-7-5A, that of which is listed with the description Bolt Machine; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015170615, part number TX1028V4-7-5A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-517-0615 Item PartTypeName: BOLT,MACHINE | 5306 | 015170615 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1314V4-7-5 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 160 POUNDS PER SQUARE INCH |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| AGAV | III END ITEM IDENTIFICATION | FIGHTER AIRCRAFT-FIRST (F18 E/F) |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | (INAVY): BOLT, MACHINE; ALSO KNOW AS BOLT, 100 DEGREES TENSION HEAD, GEAR DRIVE RECESS-TITANIUM (95 KSI SHEAR) SPECIAL THREAD LENGTH |
| AASB | FASTENER LENGTH | 0.862 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| FEAT | SPECIAL FEATURES | NEXT HIGHER ASSY'S ARE NSN 1560-01-529-5523 (STRUCTURAL, VERTICAL) & NSN 1560-01-505-2077 (FITTING, STRUCTURAL COMPONENT, AIRCRAFT) |
| MATT | MATERIAL | TITANIUM ALLOY OVERALL |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 6AL-4V TITANIUM ALLOY PER NAS4004 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASU | HEAD HEIGHT | 0.110 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL |
| AASK | HEAD STYLE | FILLISTER COUNTERSUNK |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ANEE | GRIP LENGTH | 0.437 INCHES NOMINAL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
