| Part Number : A1C753-10D40 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-527-2205 (5306015272205) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 01-527-2205 (015272205) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: A1C75310D40 | |||
Thank you for taking an interest in part number A1C753-10D40, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015272205, part number A1C753-10D40 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A1C753-10D40 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-527-2205 (5306015272205) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 015272205 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number A1C753-10D40, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015272205, part number A1C753-10D40 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-527-2205 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 015272205 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MB61-10D40 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AGAV | III END ITEM IDENTIFICATION | F/A 18 E/F AIRCRAFT |
| AASU | HEAD HEIGHT | 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-AA-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,CLOSE TOLERANCE,DOUBLE HEX HEAD,CRES |
| AHYM | NOMINAL THREAD DIAMETER | 0.6250 INCHES |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE |
| AATB | WIDTH BETWEEN FLATS | 0.940 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ANEE | GRIP LENGTH | 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| FEAT | SPECIAL FEATURES | FOR USE WITH ST3M436-() SERIES NUTS |
| AASB | FASTENER LENGTH | 3.261 INCHES MINIMUM AND 3.308 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.142 INCHES MINIMUM AND 3.179 INCHES MAXIMUM FIRST HOLE |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629, PH13-8M0 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.777 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
