| Part Number : TX1027E3D7XA | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-536-4432 (5306015364432) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-536-4432 (015364432) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number TX1027E3D7XA, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015364432, part number TX1027E3D7XA is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1027E3D7XA | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-536-4432 (5306015364432) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 015364432 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number TX1027E3D7XA, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015364432, part number TX1027E3D7XA is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-536-4432 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 015364432 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11861E3D7A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| AAJD | Thread Class | 3A |
| SUPP | Supplementary Features | COTTER PIN HOLE 0.070 INCH DIA AT THE TIP OF THE BOLT 0.106 INCH FROM THE END |
| CMLP | Thread Quantity Per Inch | 32 |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AASL | Head Diameter | 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| AASA | Thread Length | 0.330 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| AASB | Fastener Length | 0.768 INCHES MINIMUM AND 0.798 INCHES MAXIMUM |
| AGAV | End Item Identification | F/A-18 AIRCRAFT |
| CRTL | Criticality Code Justification | AGAV |
| ANEE | Grip Length | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| CXCY | Part Name Assigned By Controlling Agency | BOLT,100 DEG REDUCED HEAD,GEAR DRIVE RECESS,INCONEL 718 (125 KSI SHEAR),0.0156 INCH OVERSIZE |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| AHYM | Nominal Thread Diameter | 0.190 INCHES |
| AAJF | Thread Direction | RIGHT-HAND |
| THSD | Thread Series Designator | UNJF |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASU | Head Height | 0.042 INCHES NOMINAL |
| FEAT | Special Features | INTERNAL DRIVE RECESS PER NAS 1800 |
| STDC | Surface Treatment Document And Classification | MIL-L-87132,TY 1,GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | Grip Diameter | 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM |
| AASK | Head Style | FILLISTER COUNTERSUNK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
