| Part Number : TX1027E4D10XA | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-541-4120 (5306015414120) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-541-4120 (015414120) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number TX1027E4D10XA, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015414120, part number TX1027E4D10XA is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1027E4D10XA | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-541-4120 (5306015414120) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 015414120 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number TX1027E4D10XA, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015414120, part number TX1027E4D10XA is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-541-4120 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 015414120 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1277E4D10A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ANEE | GRIP LENGTH | 0.558 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| AASA | THREAD LENGTH | 0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| FEAT | SPECIAL FEATURES | TYPE OF INTERNAL DRIVE IS SIX LOBE RECESS PER NAS 1800; THERE IS A COTTER PIN HOLE 0.076 INCH DIA AT THE END OF THE FASTENER 0.106 INCH FROM TIP; THERE IS NO LUBRICATION ON FASTENER; MATERIAL IS INCONEL 718 W/125 KSI SHEAR |
| AASL | HEAD DIAMETER | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG REDUCED HEAD,GEAR DRIVE RECESS,INCONEL 718 (125 KSI SHEAR),0.0156 INCH OVERSIZE |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | NICKEL ALLOY OVERALL |
| AASU | HEAD HEIGHT | 0.057 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-87132,TY 1,GR B W/CETYL ALCOHOL MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 1.135 INCHES MINIMUM AND 1.165 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | F/A-18 E/F AIRCEAFT |
| AAUR | GRIP DIAMETER | 0.264 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
