| Part Number : 3M1325-5H15-44 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5306-01-569-7960 (5306015697960) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-569-7960 (015697960) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3M13255H1544 | |||
Thank you for taking an interest in part number 3M1325-5H15-44, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015697960, part number 3M1325-5H15-44 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M1325-5H15-44 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5306-01-569-7960 (5306015697960) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 015697960 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 3M1325-5H15-44, that of which is listed with the description Bolt Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5306015697960, part number 3M1325-5H15-44 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-569-7960 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 015697960 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1325-5H15-44 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ASXK | HOLE QUANTITY | 1 |
| AAZH | HEAD MINOR DIAMETER | 0.515 INCHES NOMINAL |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| ANEE | GRIP LENGTH | 0.938 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.467 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | THERE IS A 0.138-32 UNJC-3B TAPPED HOLE THROUGH TOP PORTION OF SPLINE HEAD TO ACCOMMODATE AN INJECTION PORT LOCATED ON THE GRIP 0.440 INCH BELOW THE BEARING SURFACE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BQDM | HOLE TYPE | DRILLED |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAUR | GRIP DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| CRHC | HOLE CONFIGURATION STYLE | SPLINE |
| AASB | FASTENER LENGTH | 1.389 INCHES MINIMUM AND 1.436 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AGAV | III END ITEM IDENTIFICATION | FA-18 AIRCRAFT |
| AASU | HEAD HEIGHT | 0.187 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
