| Part Number : MT2S428BC | Manufacturer : Sps Technologies Inc | ||
| NSN : 5310-00-728-7724 (5310007287724) | |||
| Item Name : Nut Self Locking Plate | CAGE Code : 11815 | ||
| NIIN : 00-728-7724 (007287724) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 05280 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MT2S428BC, that of which is listed with the description Nut Self Locking Plate; Manufactured by Sps Technologies Inc and listed alongside the NSN 5310007287724, part number MT2S428BC is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 m federal systems dept
CAGE Code: 68352 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
2is inc
CAGE Code: 1ZKD0 |
17 machinery llc
CAGE Code: 3FEG7 |
|
3 phoenix inc
CAGE Code: 3NJE3 |
5605 n illinois inc
CAGE Code: 089F4 |
|
3m touch systems inc
CAGE Code: 0A1V7 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
14 dock drive inc
CAGE Code: 14677 |
3 y power technology inc
CAGE Code: 1XVP7 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
3d pep
CAGE Code: FB830 |
|
259 holdings ltd
CAGE Code: 431P3 |
2eme regiment du materiel
CAGE Code: FARD5 |
|
3m italia spa
CAGE Code: A3445 |
| Part Number : MT2S428BC | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5310-00-728-7724 (5310007287724) | |||
| Item Name : Nut Self Locking Plate | CAGE Code : 11815 | ||
| NIIN : 007287724 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number MT2S428BC, that of which is listed with the description Nut Self Locking Plate; Manufactured by Sps Technologies Inc and listed alongside the NSN 5310007287724, part number MT2S428BC is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-728-7724 Item PartTypeName: NUT,SELF-LOCKING,PLATE | 5310 | 007287724 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MK1000-4BC | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACVN | NUT LENGTH | 0.786 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ABTB | MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ACTA | NUT STYLE | PLATE |
| ADEA | NUT HEIGHT | 0.281 INCHES MAXIMUM |
| ADEB | PLATE THICKNESS | 0.055 INCHES MAXIMUM |
| ADEC | PLATE WIDTH | 0.380 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.281 INCHES NOMINAL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.560 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| AZKQ | TEMP RATING | 450.0 DEG FAHRENHEIT NOMINAL |
| BZRR | THREAD SERIES | UNJF |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
