| Part Number : NS202822-3-10 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5310-01-533-8700 (5310015338700) | |||
| Item Name : Nut Self Locking Plate | CAGE Code : 80539 | ||
| NIIN : 01-533-8700 (015338700) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 05280 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: NS202822310 | |||
Thank you for taking an interest in part number NS202822-3-10, that of which is listed with the description Nut Self Locking Plate; Manufactured by Sps Technologies Inc and listed alongside the NSN 5310015338700, part number NS202822-3-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NS202822-3-10 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5310-01-533-8700 (5310015338700) | |||
| Item Name : Nut Self Locking Plate | CAGE Code : 80539 | ||
| NIIN : 015338700 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number NS202822-3-10, that of which is listed with the description Nut Self Locking Plate; Manufactured by Sps Technologies Inc and listed alongside the NSN 5310015338700, part number NS202822-3-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-533-8700 Item PartTypeName: NUT,SELF-LOCKING,PLATE | 5310 | 015338700 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NS202822-3-10 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 3B |
| MATT | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 BASE IRON ALLOY 660 NUT IRON ALLOY 660 SHELL STEEL COMP 631 SPRING |
| ACTA | NUT STYLE | PLATE (FLOATING) |
| ADEC | PLATE WIDTH | 0.865 INCHES MAXIMUM |
| ACVN | NUT LENGTH | 1.375 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGAV | III END ITEM IDENTIFICATION | B-2 BOMBER |
| SFTT | SURFACE TREATMENT | PASSIVATE BASE PASSIVATE NUT PASSIVATE SHELL PASSIVATE SPRING |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| CQFM | HARDNESS RATING | NOT RATED |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| ADEA | NUT HEIGHT | 0.860 INCHES NOMINAL |
| ADEB | PLATE THICKNESS | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | NO CODE LETTER AT THE END OF PART NUMBER SPECIFIES 25 LB SPRING LOAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BASE AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE NUT AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE SHELL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BASE QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHELL QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| BZRR | THREAD SERIES | UNJF |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| AZKQ | TEMP RATING | NOT RATED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
