| Part Number : SL61NM7015FSP | Manufacturer : Sps Technologies Inc | ||
| NSN : 5310-01-542-5929 (5310015425929) | |||
| Item Name : Nut Plain Round | CAGE Code : 97393 | ||
| NIIN : 01-542-5929 (015425929) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15887 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number SL61NM7015FSP, that of which is listed with the description Nut Plain Round; Manufactured by Sps Technologies Inc and listed alongside the NSN 5310015425929, part number SL61NM7015FSP is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SL61NM7015FSP | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5310-01-542-5929 (5310015425929) | |||
| Item Name : Nut Plain Round | CAGE Code : 97393 | ||
| NIIN : 015425929 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number SL61NM7015FSP, that of which is listed with the description Nut Plain Round; Manufactured by Sps Technologies Inc and listed alongside the NSN 5310015425929, part number SL61NM7015FSP is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-542-5929 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 015425929 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SL61NM7015FSP | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STL-13924 CL 1, PLUS MIL-PRF-16173 GR 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ADBG | NUT THICKNESS | 0.344 INCHES NOMINAL |
| ADBM | DRIVE POINT QUANTITY | 8 |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 3.161 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.250 INCHES NOMINAL |
| ADBJ | UNDERCUT THICKNESS | 0.080 INCHES NOMINAL |
| CSXL | III BEARING SURFACE FINISH | 63.0 MICROINCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-S-6758 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| FEAT | SPECIAL FEATURES | 1.5 MILLIMETER (MM) PITCH, 5 MM THREAD LENGTH, INSIDE DIA 70 MM; FINISH IS BLACK OXIDE; ONE HOLE 0.047 ON ONE TAB, 0.055 FROM END |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | LOCKNUT, STA-LOK BEARING RETAINING |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| ABKU | FLANGE THICKNESS | 0.184 INCHES NOMINAL |
| ABQU | DRIVE POINT DEPTH | 0.188 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
