| Part Number : CDR-9401-MS-4-07 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5320-00-055-3209 (5320000553209) | |||
| Item Name : Rivet Blind | CAGE Code : 11815 | ||
| NIIN : 00-055-3209 (000553209) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00864 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: CDR9401MS407 | |||
Thank you for taking an interest in part number CDR-9401-MS-4-07, that of which is listed with the description Rivet Blind; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320000553209, part number CDR-9401-MS-4-07 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CDR-9401-MS-4-07 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5320-00-055-3209 (5320000553209) | |||
| Item Name : Rivet Blind | CAGE Code : 11815 | ||
| NIIN : 000553209 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number CDR-9401-MS-4-07, that of which is listed with the description Rivet Blind; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320000553209, part number CDR-9401-MS-4-07 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-055-3209 Item PartTypeName: RIVET,BLIND | 5320 | 000553209 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 38-504-07-13 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.302 INCHES MINIMUM AND 0.342 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| AAZF | SHANK STYLE | DRIVE PIN |
| AAZG | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| ABAF | EXPANSION DEVICE | DRIVE STEM-TYPE H |
| ANEE | GRIP LENGTH | 0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2117 BODY |
| MATT | MATERIAL | ALUMINUM ALLOY 2117 SLEEVE OR ALUMINUM ALLOY 5056 SLEEVE |
| MATT | MATERIAL | STEEL COMP 301 STEM OR STEEL COMP 302 STEM OR STEEL COMP 303 STEM OR STEEL COMP 303F STEM OR STEEL COMP 303S STEM OR STEEL COMP 303SE STEM OR STEEL COMP 304 STEM OR STEEL COMP 304L STEM OR STEEL COMP 305 STEM OR STEEL COMP 308 STEM OR STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES STEM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC ALL MATERIAL RESPONSES SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| SFTT | SURFACE TREATMENT | ANODIZE BODY |
| SFTT | SURFACE TREATMENT | PASSIVATE STEM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
