| Part Number : CR9116-3-4 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5320-00-761-3134 (5320007613134) | |||
| Item Name : Rivet Blind | CAGE Code : 11815 | ||
| NIIN : 00-761-3134 (007613134) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00864 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: CR911634 | |||
Thank you for taking an interest in part number CR9116-3-4, that of which is listed with the description Rivet Blind; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320007613134, part number CR9116-3-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CR9116-3-4 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5320-00-761-3134 (5320007613134) | |||
| Item Name : Rivet Blind | CAGE Code : 11815 | ||
| NIIN : 007613134 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number CR9116-3-4, that of which is listed with the description Rivet Blind; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320007613134, part number CR9116-3-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-761-3134 Item PartTypeName: RIVET,BLIND | 5320 | 007613134 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS20605AD3W4 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.328 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZF | SHANK STYLE | PULL THROUGH HOLLOW SHANK |
| AAZG | HEAD MAJOR DIAMETER | 0.179 INCHES NOMINAL |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| ANEE | GRIP LENGTH | 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| CQSX | SHEAR STRENGTH | 70 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2117 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL OR OXIDE FILM OVERALL |
| AAZE | SHANK DIAMETER | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
