| Part Number : CDR-9401-MS-5-06 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5320-00-823-8650 (5320008238650) | |||
| Item Name : Rivet Blind | CAGE Code : 11815 | ||
| NIIN : 00-823-8650 (008238650) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00864 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: CDR9401MS506 | |||
Thank you for taking an interest in part number CDR-9401-MS-5-06, that of which is listed with the description Rivet Blind; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320008238650, part number CDR-9401-MS-5-06 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CDR-9401-MS-5-06 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5320-00-823-8650 (5320008238650) | |||
| Item Name : Rivet Blind | CAGE Code : 11815 | ||
| NIIN : 008238650 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number CDR-9401-MS-5-06, that of which is listed with the description Rivet Blind; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320008238650, part number CDR-9401-MS-5-06 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-823-8650 Item PartTypeName: RIVET,BLIND | 5320 | 008238650 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CDR-9401-MS-5-06 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.312 INCHES NOMINAL |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM |
| AAZF | SHANK STYLE | DRIVE PIN |
| AAZG | HEAD MAJOR DIAMETER | 0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| ABAF | EXPANSION DEVICE | DRIVE STEM-TYPE H |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2117 SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES STEM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| SFTT | SURFACE TREATMENT | ANODIZE SLEEVE OR CHROMATE SLEEVE |
| SFTT | SURFACE TREATMENT | PASSIVATE STEM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE SLEEVE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE SLEEVE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC ALL TREATMENT RESPONSES STEM |
| ANEE | GRIP LENGTH | 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| HEAT | HEAT TREATMENT | ANNEALED OVERALL |
| MATT | MATERIAL | STEEL COMP 301 STEM OR STEEL COMP 302 STEM OR STEEL COMP 303 STEM OR STEEL COMP 303F STEM OR STEEL COMP 303S STEM OR STEEL COMP 303SE STEM OR STEEL COMP 304 STEM OR STEEL COMP 304L STEM OR STEEL COMP 305 STEM OR STEEL COMP 308 STEM OR STEEL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
