| Part Number : HLT915LP10-7 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5320-01-101-6112 (5320011016112) | |||
| Item Name : Pin Rivet | CAGE Code : 56878 | ||
| NIIN : 01-101-6112 (011016112) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 67165 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HLT915LP107 | |||
Thank you for taking an interest in part number HLT915LP10-7, that of which is listed with the description Pin Rivet; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320011016112, part number HLT915LP10-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HLT915LP10-7 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5320-01-101-6112 (5320011016112) | |||
| Item Name : Pin Rivet | CAGE Code : 56878 | ||
| NIIN : 011016112 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number HLT915LP10-7, that of which is listed with the description Pin Rivet; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320011016112, part number HLT915LP10-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-101-6112 Item PartTypeName: PIN-RIVET | 5320 | 011016112 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AIC-L-807-10-07P | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AATB | WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET,STRAIGHT,THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.565 INCHES MAXIMUM |
| ABAJ | LUBRICATION | DRY FILM AND CETYL ALCOHOL |
| ANEE | GRIP LENGTH | 0.376 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| CQSX | SHEAR STRENGTH | 108000 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
