| Part Number : HL21PB-10-15 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5320-01-125-5101 (5320011255101) | |||
| Item Name : Pin Rivet | CAGE Code : 56878 | ||
| NIIN : 01-125-5101 (011255101) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 67165 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HL21PB1015 | |||
Thank you for taking an interest in part number HL21PB-10-15, that of which is listed with the description Pin Rivet; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320011255101, part number HL21PB-10-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HL21PB-10-15 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5320-01-125-5101 (5320011255101) | |||
| Item Name : Pin Rivet | CAGE Code : 56878 | ||
| NIIN : 011255101 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number HL21PB-10-15, that of which is listed with the description Pin Rivet; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320011255101, part number HL21PB-10-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-125-5101 Item PartTypeName: PIN-RIVET | 5320 | 011255101 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HL21PB-10-15 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AATB | WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET,STRAIGHT,THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.6335 INCHES MAXIMUM |
| ABAJ | LUBRICATION | CETYL ALCOHOL,SPEC 305,HI-SHEAR CORP |
| ANEE | GRIP LENGTH | 0.943 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
