| Part Number : TL956-5-13-40 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5320-01-157-7617 (5320011577617) | |||
| Item Name : Pin Rivet | CAGE Code : 56878 | ||
| NIIN : 01-157-7617 (011577617) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 67165 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TL95651340 | |||
Thank you for taking an interest in part number TL956-5-13-40, that of which is listed with the description Pin Rivet; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320011577617, part number TL956-5-13-40 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TL956-5-13-40 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5320-01-157-7617 (5320011577617) | |||
| Item Name : Pin Rivet | CAGE Code : 56878 | ||
| NIIN : 011577617 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number TL956-5-13-40, that of which is listed with the description Pin Rivet; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320011577617, part number TL956-5-13-40 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-157-7617 Item PartTypeName: PIN-RIVET | 5320 | 011577617 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TL596-5-13-40 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.183 INCHES MINIMUM AND 1.208 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AAZE | SHANK DIAMETER | 0.3547 INCHES NOMINAL |
| AAZF | SHANK STYLE | PIN-RIVET,TAPERED,THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.522 INCHES MAXIMUM |
| AAZU | TIP DIAMETER | 0.3410 INCHES NOMINAL |
| ABAJ | LUBRICATION | CETYL ALCOHOL |
| ANEE | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.3125 INCHES |
| CQSX | SHEAR STRENGTH | 108000 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | 8-32UNJC-3B THREAD SIZE,0.520 IN. LG ALONG THE LONGITUDINAL AXIS FROM THE HEAD END,0.120 IN. SLOT LG,0.060 IN. SLOT W LOCATED 0.460 IN. FROM TOP OF HEAD TO CENTER OF SLOT |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL OR STEEL COMP E4340 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
