| Part Number : TLD956-5-17E59 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5320-01-210-3946 (5320012103946) | |||
| Item Name : Pin Rivet | CAGE Code : 80539 | ||
| NIIN : 01-210-3946 (012103946) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 67165 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TLD956517E59 | |||
Thank you for taking an interest in part number TLD956-5-17E59, that of which is listed with the description Pin Rivet; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320012103946, part number TLD956-5-17E59 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TLD956-5-17E59 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5320-01-210-3946 (5320012103946) | |||
| Item Name : Pin Rivet | CAGE Code : 80539 | ||
| NIIN : 012103946 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number TLD956-5-17E59, that of which is listed with the description Pin Rivet; Manufactured by Sps Technologies Inc and listed alongside the NSN 5320012103946, part number TLD956-5-17E59 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-210-3946 Item PartTypeName: PIN-RIVET | 5320 | 012103946 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TLD956-5-17E59 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.434 INCHES MINIMUM AND 1.458 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AAZE | SHANK DIAMETER | 0.3547 INCHES NOMINAL |
| AAZF | SHANK STYLE | PIN-RIVET,TAPERED,THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.522 INCHES MAXIMUM |
| AAZU | TIP DIAMETER | 0.3358 INCHES NOMINAL |
| ABAJ | LUBRICATION | DRY FILM AND CETYL ALCOHOL |
| ANEE | GRIP LENGTH | 1.052 INCHES MINIMUM AND 1.067 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.3125 INCHES |
| CQSX | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | 0.138-32UNJC-3B THREADED CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE OF HEAD END 0.710 IN. MIN,0.720 IN. MAX DP,0.120 IN. SLOT LG,0.060 IN. SLOT W LOCATED 0.590 IN. FROM TOP PF HEAD TO BEGINNING OF SLOT |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
