| Part Number : 537985 | Manufacturer : Ssanford Tool And Design Inc | ||
| NSN : 5305-00-939-0483 (5305009390483) | |||
| Item Name : Screw Machine | CAGE Code : 53375 | ||
| NIIN : 00-939-0483 (009390483) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 537985, that of which is listed with the description Screw Machine; Manufactured by Ssanford Tool And Design Inc and listed alongside the NSN 5305009390483, part number 537985 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 537985 | Manufacturer : Ssanford Tool And Design Inc | ||
| NSN Number : 5305-00-939-0483 (5305009390483) | |||
| Item Name : Screw Machine | CAGE Code : 53375 | ||
| NIIN : 009390483 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 537985, that of which is listed with the description Screw Machine; Manufactured by Ssanford Tool And Design Inc and listed alongside the NSN 5305009390483, part number 537985 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-939-0483 Item PartTypeName: SCREW,MACHINE | 5305 | 009390483 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 537985 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.585 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.825 INCHES MINIMUM AND 0.845 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | 0.2213/0.2238 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | NICKEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | PWA90,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE |
| FEAT | SPECIAL FEATURES | 2 FLATS ON HEAD 0.360MIN. AND 0.380 MAX. WIDTH ACROSS FLATS |
| THSD | THREAD SERIES DESIGNATOR | UNS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
