| Part Number : 754-0004-000 | Manufacturer : Standex Electronics Inc | ||
| NSN : 5915-00-069-3876 (5915000693876) | |||
| Item Name : Filter Low Pass | CAGE Code : 10581 | ||
| NIIN : 00-069-3876 (000693876) | |||
| FSC Code : 5915 Filters and Networks | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 13911 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 7540004000 | |||
Thank you for taking an interest in part number 754-0004-000, that of which is listed with the description Filter Low Pass; Manufactured by Standex Electronics Inc and listed alongside the NSN 5915000693876, part number 754-0004-000 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 754-0004-000 | Manufacturer : Standex Electronics Inc | ||
| NSN Number : 5915-00-069-3876 (5915000693876) | |||
| Item Name : Filter Low Pass | CAGE Code : 10581 | ||
| NIIN : 000693876 | |||
| FSC CODE : 5915 Filters and Networks | |||
Thank you for taking an interest in part number 754-0004-000, that of which is listed with the description Filter Low Pass; Manufactured by Standex Electronics Inc and listed alongside the NSN 5915000693876, part number 754-0004-000 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5915-00-069-3876 Item PartTypeName: FILTER,LOW PASS | 5915 | 000693876 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 754-0004-000 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKW | OVERALL HEIGHT | 0.750 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 3.000 INCHES NOMINAL |
| ADAT | BODY WIDTH | 2.180 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.500 INCHES NOMINAL |
| AFGA | OPERATING TEMP RANGE | -28.0 TO 65.0 DEG CELSIUS |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | 1.9 KILOHERTZ BLANK |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | 600.0 OHMS BLANK |
| AHAS | LOAD IMPEDANCE PER FUNCTION | 1.0 KILOHMS BLANK |
| AHBL | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE BLANK |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AKNA | INCLOSURE TYPE | ENCASED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED HOLE 2ND FUNCTION |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 0.5 BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN GROUND 3RD FUNCTION |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN INPUT 1ST FUNCTION |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN OUTPUT 2ND FUNCTION |
| CQDZ | MAXIMUM DIELECTRIC WITHSTANDING AC RMS VOLTAGE | 15.0 VOLTS AT SEA LEVEL |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 300.00 HERTZ BLANK AND 3.50 KILOHERTZ BLANK AND 5.00 KILOHERTZ BLANK AND 20.00 KILOHERTZ BLANK |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | 300.00 HERTZ BLANK AND 3.50 KILOHERTZ BLANK |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 0.5 NOMINAL BLANK AND 25.0 NOMINAL BLANK 1ST FUNCTION |
| STYL | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| TEST | TEST DATA DOCUMENT | 00724-08-00680-000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
