| Part Number : TRL-7 | Manufacturer : Stephens Adamson Inc | ||
| NSN : 3120-01-142-0687 (3120011420687) | |||
| Item Name : Bearing Plain Rod End | CAGE Code : 57448 | ||
| NIIN : 01-142-0687 (011420687) | |||
| FSC Code : 3120 Bearings Plain Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 13209 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TRL7 | |||
Thank you for taking an interest in part number TRL-7, that of which is listed with the description Bearing Plain Rod End; Manufactured by Stephens Adamson Inc and listed alongside the NSN 3120011420687, part number TRL-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TRL-7 | Manufacturer : Stephens Adamson Inc | ||
| NSN Number : 3120-01-142-0687 (3120011420687) | |||
| Item Name : Bearing Plain Rod End | CAGE Code : 57448 | ||
| NIIN : 011420687 | |||
| FSC CODE : 3120 Bearings Plain Unmounted | |||
Thank you for taking an interest in part number TRL-7, that of which is listed with the description Bearing Plain Rod End; Manufactured by Stephens Adamson Inc and listed alongside the NSN 3120011420687, part number TRL-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-142-0687 Item PartTypeName: BEARING,PLAIN,ROD END | 3120 | 011420687 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2084-1139-P4 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZF | SHANK STYLE | INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE |
| ABHP | OVERALL LENGTH | 2.3650 INCHES MINIMUM AND 2.3850 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGAV | END ITEM IDENTIFICATION | 1280-00-856-3836 ANTENNA ASQ-38 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | 1.1150 INCHES MINIMUM AND 1.1350 INCHES MAXIMUM |
| AGGG | BORE CENTER TO SHANK END DISTANCE | 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM |
| AGGH | OUTER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM |
| AGGJ | INNER MEMBER WIDTH | 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM |
| AGGL | SHANK END TO SHOULDER LENGTH | 1.2490 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 1.0620 INCHES NOMINAL |
| AGHA | INSPECTION HOLE CENTER TO END DISTANCE | 0.5310 INCHES NOMINAL |
| AGHB | SHANK WIDTH ACROSS WRENCH FLATS | 0.7500 INCHES NOMINAL |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CTLM | LUBRICATION FEATURE | GROOVE INTERNAL RACE INSERT |
| FEAT | SPECIAL FEATURES | RADIAL PLAY OF BALL SHALL NOT BE GREATER THAN 0.001 INCHES. SHANK MUST TURN FREELY ABOUT THE BALL UNDER ITS OWN WEIGHT |
| MATT | MATERIAL | STEEL COMP E52100 INNER MEMBER |
| MATT | MATERIAL | STEEL ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
| SFTT | SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| STYL | STYLE DESIGNATOR | SHOULDERED BALL TYPE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
