| Part Number : EMP55 | Manufacturer : Stephens Adamson Inc | ||
| NSN : 3130-00-732-0184 (3130007320184) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 57448 | ||
| NIIN : 00-732-0184 (007320184) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number EMP55, that of which is listed with the description Bearing Unit Ball; Manufactured by Stephens Adamson Inc and listed alongside the NSN 3130007320184, part number EMP55 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : EMP55 | Manufacturer : Stephens Adamson Inc | ||
| NSN Number : 3130-00-732-0184 (3130007320184) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 57448 | ||
| NIIN : 007320184 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number EMP55, that of which is listed with the description Bearing Unit Ball; Manufactured by Stephens Adamson Inc and listed alongside the NSN 3130007320184, part number EMP55 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-732-0184 Item PartTypeName: BEARING UNIT,BALL | 3130 | 007320184 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 30F06 | 2 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.9375 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 2.3750 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 3.4375 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 1.3125 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 8.2500 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 15.0000 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 4.3750 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 4.3750 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 4.0000 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL SEAL AND WOOL SEAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 11.1250 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
