| Part Number : MFP35 | Manufacturer : Stephens Adamson Inc | ||
| NSN : 3130-00-967-2842 (3130009672842) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 57448 | ||
| NIIN : 00-967-2842 (009672842) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MFP35, that of which is listed with the description Bearing Unit Ball; Manufactured by Stephens Adamson Inc and listed alongside the NSN 3130009672842, part number MFP35 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MFP35 | Manufacturer : Stephens Adamson Inc | ||
| NSN Number : 3130-00-967-2842 (3130009672842) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 57448 | ||
| NIIN : 009672842 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number MFP35, that of which is listed with the description Bearing Unit Ball; Manufactured by Stephens Adamson Inc and listed alongside the NSN 3130009672842, part number MFP35 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-967-2842 Item Description: BEARING UNIT,BALL | 3130 | 009672842 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MFP35 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.7500 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.1875 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 7.5000 INCHES NOMINAL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.2500 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 5.8125 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 4.1250 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 10.2500 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | SLINGER |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.7500 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL SEAL AND WOOL SEAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
