| Part Number : 4182 | Manufacturer : Stinson Mfg Co | ||
| NSN : 1730-00-017-8490 (1730000178490) | |||
| Item Name : Lever Door Drag Chu | CAGE Code : 26739 | ||
| NIIN : 00-017-8490 (000178490) | |||
| FSC Code : 1730 Aircraft Ground Servicing Equipment | |||
| FSG Code : 17 Aircraft And Space Launching-Landing-Ground Handling Equip | |||
| INC Code : 77777 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 4182, that of which is listed with the description Lever Door Drag Chu; Manufactured by Stinson Mfg Co and listed alongside the NSN 1730000178490, part number 4182 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 4182 | Manufacturer : Stinson Mfg Co | ||
| NSN Number : 1730-00-017-8490 (1730000178490) | |||
| Item Name : Lever Door Drag Chu | CAGE Code : 26739 | ||
| NIIN : 000178490 | |||
| FSC CODE : 1730 Aircraft Ground Servicing Equipment | |||
Thank you for taking an interest in part number 4182, that of which is listed with the description Lever Door Drag Chu; Manufactured by Stinson Mfg Co and listed alongside the NSN 1730000178490, part number 4182 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | End Item Identification | F5 AIRCRAFT |
| MRC | Decoded Requirement | Clear Text Reply |
| TEXT | General Characteristics Item Description | PLATE,LUG,HANDLE,PIN ARE STEEL; PAD MATERIAL CHLOROPRENE; HANDLE LENGTH IS APPROXIMATELY 18.500 INCHES LONG; 45.0 DEGREE ANGLE AT BASE; 4.000 INCHES FROM BASE PLATE HANDLE IS 3.250 INCH RADII AT 15.0 DEGREE BEND; TOP OF HANDLE IS CHAMFERED 45.0 DEGREES; LUG IS WELDED ON HANDLE 7.320 INCHES UP FROM BOTTOM OF HANDLE W/DRILLED THROUGH HOLE 0.250 INCH DIAMETER TO ACCOMODATE PIN WHICH IS TACK WELDED IN PLACE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
