| Part Number : 6-76004 | Manufacturer : Stinson Mfg Co | ||
| NSN : 1730-00-017-8490 (1730000178490) | |||
| Item Name : Lever Door Drag Chu | CAGE Code : 26739 | ||
| NIIN : 00-017-8490 (000178490) | |||
| FSC Code : 1730 Aircraft Ground Servicing Equipment | |||
| FSG Code : 17 Aircraft And Space Launching-Landing-Ground Handling Equip | |||
| INC Code : 77777 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 676004 | |||
Thank you for taking an interest in part number 6-76004, that of which is listed with the description Lever Door Drag Chu; Manufactured by Stinson Mfg Co and listed alongside the NSN 1730000178490, part number 6-76004 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 6-76004 | Manufacturer : Stinson Mfg Co | ||
| NSN Number : 1730-00-017-8490 (1730000178490) | |||
| Item Name : Lever Door Drag Chu | CAGE Code : 26739 | ||
| NIIN : 000178490 | |||
| FSC CODE : 1730 Aircraft Ground Servicing Equipment | |||
Thank you for taking an interest in part number 6-76004, that of which is listed with the description Lever Door Drag Chu; Manufactured by Stinson Mfg Co and listed alongside the NSN 1730000178490, part number 6-76004 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | End Item Identification | F5 AIRCRAFT |
| MRC | Decoded Requirement | Clear Text Reply |
| TEXT | General Characteristics Item Description | PLATE,LUG,HANDLE,PIN ARE STEEL; PAD MATERIAL CHLOROPRENE; HANDLE LENGTH IS APPROXIMATELY 18.500 INCHES LONG; 45.0 DEGREE ANGLE AT BASE; 4.000 INCHES FROM BASE PLATE HANDLE IS 3.250 INCH RADII AT 15.0 DEGREE BEND; TOP OF HANDLE IS CHAMFERED 45.0 DEGREES; LUG IS WELDED ON HANDLE 7.320 INCHES UP FROM BOTTOM OF HANDLE W/DRILLED THROUGH HOLE 0.250 INCH DIAMETER TO ACCOMODATE PIN WHICH IS TACK WELDED IN PLACE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
