| Part Number : 290-420 | Manufacturer : Sunbelt Design And Development Inc | ||
| NSN : 3010-01-507-1858 (3010015071858) | |||
| Item Name : Drive Unit Angle | CAGE Code : 0FC01 | ||
| NIIN : 01-507-1858 (015071858) | |||
| FSC Code : 3010 Torque Converters and Speed Changers | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 62392 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 290420 | |||
Thank you for taking an interest in part number 290-420, that of which is listed with the description Drive Unit Angle; Manufactured by Sunbelt Design And Development Inc and listed alongside the NSN 3010015071858, part number 290-420 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 s mfg
CAGE Code: 0D9C0 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3m unitek corporation
CAGE Code: 90444 |
3m touch systems inc
CAGE Code: 0A1V7 |
|
4fastplumber llc
CAGE Code: 4P0W6 |
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
|
3m company communication markets
CAGE Code: 0VGY3 |
3 d machining inc
CAGE Code: 09SY7 |
|
2001 humana press inc
CAGE Code: 34CH3 |
485 engineering installation group
CAGE Code: 13676,14943 |
|
3m purification inc
CAGE Code: 15472 |
2 mb distribution
CAGE Code: FAH01 |
|
3m co health care services sales
CAGE Code: 0Z2D0 |
3075109 canada inc
CAGE Code: L09L0 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
| Part Number : 290-420 | Manufacturer : Sunbelt Design And Development Inc | ||
| NSN Number : 3010-01-507-1858 (3010015071858) | |||
| Item Name : Drive Unit Angle | CAGE Code : 0FC01 | ||
| NIIN : 015071858 | |||
| FSC CODE : 3010 Torque Converters and Speed Changers | |||
Thank you for taking an interest in part number 290-420, that of which is listed with the description Drive Unit Angle; Manufactured by Sunbelt Design And Development Inc and listed alongside the NSN 3010015071858, part number 290-420 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-01-507-1858 Item PartTypeName: DRIVE UNIT,ANGLE | 3010 | 015071858 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 290-420-10 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AJAB | DRIVE SHAFT TYPE | PINNED |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | GEARBOX,MITER |
| FEAT | SPECIAL FEATURES | PART CAN BE MADE FROM CAGE 0FC01, P/N 290-420-01 OR CAGE 29440,P/N MX-3 B-D;DIFF IS .094 HOLES IN THREE SHAFTS;PART O.A. LENGTH IS 4.06;OIL-LESS BEARINGS; MAX TORQUE 500 OZ IN |
| AGAV | III END ITEM IDENTIFICATION | NSN 1730-00-773-8591 |
| ABKW | OVERALL HEIGHT | 3.350 INCHES NOMINAL |
| AJAC | DRIVE SHAFT END DIAMETER | 0.249 INCHES NOMINAL |
| BTCJ | GEAR RATIO | 1 TO 1 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
