| Part Number : 6PT47972 | Manufacturer : Sundstrand International Corporation | ||
| NSN : 5120-00-566-5058 (5120005665058) | |||
| Item Name : Puller Mechanical | CAGE Code : 58417 | ||
| NIIN : 00-566-5058 (005665058) | |||
| FSC Code : 5120 Hand Tools Nonedged Nonpowered | |||
| FSG Code : 51 Hand Tools | |||
| INC Code : 18913 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 6PT47972, that of which is listed with the description Puller Mechanical; Manufactured by Sundstrand International Corporation and listed alongside the NSN 5120005665058, part number 6PT47972 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 6PT47972 | Manufacturer : Sundstrand International Corporation | ||
| NSN Number : 5120-00-566-5058 (5120005665058) | |||
| Item Name : Puller Mechanical | CAGE Code : 58417 | ||
| NIIN : 005665058 | |||
| FSC CODE : 5120 Hand Tools Nonedged Nonpowered | |||
Thank you for taking an interest in part number 6PT47972, that of which is listed with the description Puller Mechanical; Manufactured by Sundstrand International Corporation and listed alongside the NSN 5120005665058, part number 6PT47972 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | TO NAME: SEAL ASSEMBLY PULLER; USED DURING DISASSEMBLY OF PULLER TURBINE ROTOR ASSEMBLY TO REMOVE BALL BEARING, BEARING SPACER, AND SEAL ASSEMBLY FROM TURBINE ROTOR SHAFT |
| SR-5 | DESIGN CONTROL REFERENCE | 6PT47972 |
| SR-5 | THE MANUFACTURERS DATA | |
| AGAV | III END ITEM IDENTIFICATION | CARTRIDGE/PNEUMATIC ENGINE STARTER, MODEL CPS 02 & 07 |
| RDAL | III REFERENCE DATA AND LITERATURE | TO 2JA3-22-3 |
| SR-5 | MANUFACTURERS CODE | 99167 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
