| Part Number : 9M702-5A1 | Manufacturer : Swan Industries Inc | ||
| NSN : 5340-01-509-9285 (5340015099285) | |||
| Item Name : Clamp Block Section | CAGE Code : 54112 | ||
| NIIN : 01-509-9285 (015099285) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 39404 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 9M7025A1 | |||
Thank you for taking an interest in part number 9M702-5A1, that of which is listed with the description Clamp Block Section; Manufactured by Swan Industries Inc and listed alongside the NSN 5340015099285, part number 9M702-5A1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 9M702-5A1 | Manufacturer : Swan Industries Inc | ||
| NSN Number : 5340-01-509-9285 (5340015099285) | |||
| Item Name : Clamp Block Section | CAGE Code : 54112 | ||
| NIIN : 015099285 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 9M702-5A1, that of which is listed with the description Clamp Block Section; Manufactured by Swan Industries Inc and listed alongside the NSN 5340015099285, part number 9M702-5A1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-509-9285 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 015099285 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9M702-5A1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | MATERIAL | PLASTIC |
| SUPP | III SUPPLEMENTARY FEATURES | A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM) |
| BYGG | BLOCK HEIGHT | 0.630 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 2 |
| CWWM | CLAMPING HOLE DIAMETER | 0.766 INCHES NOMINAL ALL HOLES |
| ABHP | OVERALL LENGTH | 2.124 INCHES NOMINAL |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 1.062 INCHES NOMINAL |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.469 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.186 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | MATERIAL-NYLON,CLASS FILLED PER P.S. 14280,GRADE B,CLASS |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP,BLOCK-TUBE SUPPORT,PLASTIC |
| ABTB | MOUNTING HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.288 INCHES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| ABMK | OVERALL WIDTH | 0.575 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
