| Part Number : 103S20K | Manufacturer : Techno Components Corp | ||
| NSN : 5905-00-761-4434 (5905007614434) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 17826 | ||
| NIIN : 00-761-4434 (007614434) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 103S20K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Techno Components Corp and listed alongside the NSN 5905007614434, part number 103S20K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 103S20K | Manufacturer : Techno Components Corp | ||
| NSN Number : 5905-00-761-4434 (5905007614434) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 17826 | ||
| NIIN : 007614434 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 103S20K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Techno Components Corp and listed alongside the NSN 5905007614434, part number 103S20K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-761-4434 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 007614434 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 103S20K | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| ABHP | OVERALL LENGTH | 0.450 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.375 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.185 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.077 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.093 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.075 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.375 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.185 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.375 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.375 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 13499-381-9057 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
