| Part Number : 151S200 | Manufacturer : Techno Components Corp | ||
| NSN : 5905-00-861-5540 (5905008615540) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 17826 | ||
| NIIN : 00-861-5540 (008615540) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 151S200, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Techno Components Corp and listed alongside the NSN 5905008615540, part number 151S200 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 151S200 | Manufacturer : Techno Components Corp | ||
| NSN Number : 5905-00-861-5540 (5905008615540) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 17826 | ||
| NIIN : 008615540 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 151S200, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Techno Components Corp and listed alongside the NSN 5905008615540, part number 151S200 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-861-5540 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008615540 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4015696-0702 | 1 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.019 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.395 INCHES MINIMUM AND 0.415 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CBME | CUBIC MEASURE | 0.028 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 200.0 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| ADAT | BODY WIDTH | 0.175 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
