Part Number : 311-2230-00 | Manufacturer : Tektronix Gmbh | ||
NSN : 5905-01-269-5121 (5905012695121) | |||
Item Name : Resistor Variable Nonwire Wound | CAGE Code : 80009 | ||
NIIN : 01-269-5121 (012695121) | |||
FSC Code : 5905 Resistors | |||
FSG Code : 59 Electrical and Electronic Equipment Components | |||
INC Code : 37405 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: 311223000 |
Thank you for taking an interest in part number 311-2230-00, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Tektronix Gmbh and listed alongside the NSN 5905012695121, part number 311-2230-00 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 311-2230-00 | Manufacturer : Tektronix Gmbh | ||
NSN Number : 5905-01-269-5121 (5905012695121) | |||
Item Name : Resistor Variable Nonwire Wound | CAGE Code : 80009 | ||
NIIN : 012695121 | |||
FSC CODE : 5905 Resistors |
Thank you for taking an interest in part number 311-2230-00, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Tektronix Gmbh and listed alongside the NSN 5905012695121, part number 311-2230-00 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-01-269-5121 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 012695121 | 0 | N | B | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | B | A | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
GF06UT 500 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 1 |
AAQL | BODY STYLE | CYLINDRICAL |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
ABJT | TERMINAL LENGTH | 0.300 INCHES NOMINAL |
ABPM | BODY DIAMETER | 0.287 INCHES MAXIMUM |
ADAQ | BODY LENGTH | 0.244 INCHES MAXIMUM |
AEFD | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE |
AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
AGAV | END ITEM IDENTIFICATION | 6625-01-159-3106 OSCILLOSCOPE |
APXH | UNABLE TO DECODE | UNABLE TO DECODE |
AXGY | MOUNTING METHOD | TERMINAL |
CBME | CUBIC MEASURE | 0.016 CUBIC INCHES |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
CQTM | TERMINAL LOCATION | REAR END |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote